Gain

SCPI Commands :

[SOURce<HW>]:AREGenerator:RADar:ANTenna:REG:GAIN:RX
[SOURce<HW>]:AREGenerator:RADar:ANTenna:REG:GAIN:TX

class GainCls[source]

Gain commands group definition. 2 total commands, 0 Subgroups, 2 group commands

get_rx() → int[source]

# SCPI: [SOURce<HW>]:AREGenerator:RADar:ANTenna:REG:GAIN:RX
value: int = driver.source.areGenerator.radar.antenna.reg.gain.get_rx()

Queries the antenna gain of the transmitting/receiving antenna. If [:SOURce<hw>]:AREGenerator:RADar:ANTenna:CUSTom[:STATe]1, you can define a customer-specific antenna gain value.

return:

areg_ant_gain_rx: integer Range: 0 to 30

get_tx() → int[source]

# SCPI: [SOURce<HW>]:AREGenerator:RADar:ANTenna:REG:GAIN:TX
value: int = driver.source.areGenerator.radar.antenna.reg.gain.get_tx()

Queries the antenna gain of the transmitting/receiving antenna. If [:SOURce<hw>]:AREGenerator:RADar:ANTenna:CUSTom[:STATe]1, you can define a customer-specific antenna gain value.

return:

areg_ant_gain_tx: No help available

set_rx(areg_ant_gain_rx: int) → None[source]

# SCPI: [SOURce<HW>]:AREGenerator:RADar:ANTenna:REG:GAIN:RX
driver.source.areGenerator.radar.antenna.reg.gain.set_rx(areg_ant_gain_rx = 1)

Queries the antenna gain of the transmitting/receiving antenna. If [:SOURce<hw>]:AREGenerator:RADar:ANTenna:CUSTom[:STATe]1, you can define a customer-specific antenna gain value.

param areg_ant_gain_rx:

integer Range: 0 to 30

set_tx(areg_ant_gain_tx: int) → None[source]

# SCPI: [SOURce<HW>]:AREGenerator:RADar:ANTenna:REG:GAIN:TX
driver.source.areGenerator.radar.antenna.reg.gain.set_tx(areg_ant_gain_tx = 1)

Queries the antenna gain of the transmitting/receiving antenna. If [:SOURce<hw>]:AREGenerator:RADar:ANTenna:CUSTom[:STATe]1, you can define a customer-specific antenna gain value.

param areg_ant_gain_tx:

integer Range: 0 to 30