Units

SCPI Commands :

[SOURce<HW>]:AREGenerator:UNITs:ANGLe
[SOURce<HW>]:AREGenerator:UNITs:DOPPler
[SOURce<HW>]:AREGenerator:UNITs:RANGe
[SOURce<HW>]:AREGenerator:UNITs:RCS
[SOURce<HW>]:AREGenerator:UNITs:SHIFt
[SOURce<HW>]:AREGenerator:UNITs:SPEed

class UnitsCls

Units commands group definition. 6 total commands, 0 Subgroups, 6 group commands

get_angle() → UnitAngleAreg

# SCPI: [SOURce<HW>]:AREGenerator:UNITs:ANGLe
value: enums.UnitAngleAreg = driver.source.areGenerator.units.get_angle()

No command help available

return:

areg_unit_agle: No help available

get_doppler() → AregDopplerUnit

# SCPI: [SOURce<HW>]:AREGenerator:UNITs:DOPPler
value: enums.AregDopplerUnit = driver.source.areGenerator.units.get_doppler()

Defines if the radial velocity is defined as Doppler speed or frequency.

return:

areg_obj_dopp_unit: SPEed| FREQuency

get_range() → UnitLengthAreg

# SCPI: [SOURce<HW>]:AREGenerator:UNITs:RANGe
value: enums.UnitLengthAreg = driver.source.areGenerator.units.get_range()

Defines the range unit.

return:

areg_unit_range: M| CM| FT M Meter CM Centimeter FT Feet

get_rcs() → UnitRcsAreg

# SCPI: [SOURce<HW>]:AREGenerator:UNITs:RCS
value: enums.UnitRcsAreg = driver.source.areGenerator.units.get_rcs()

Defines the unit of the radar cross section.

return:

areg_unit_rcs: DBSM| SM DBSM dB relative to one square meter. SM m2 (square meters) .

get_shift() → UnitShiftAreg

# SCPI: [SOURce<HW>]:AREGenerator:UNITs:SHIFt
value: enums.UnitShiftAreg = driver.source.areGenerator.units.get_shift()

No command help available

return:

areg_unit_shift: No help available

get_speed() → UnitSpeedAreg

# SCPI: [SOURce<HW>]:AREGenerator:UNITs:SPEed
value: enums.UnitSpeedAreg = driver.source.areGenerator.units.get_speed()

Defines the speed unit.

return:

areg_unit_speed: KMH| MPH| MPS KMH Kilometer per hour MPH Miles per Hour MPS Meter per Seconds

set_angle(areg_unit_agle: UnitAngleAreg) → None

# SCPI: [SOURce<HW>]:AREGenerator:UNITs:ANGLe
driver.source.areGenerator.units.set_angle(areg_unit_agle = enums.UnitAngleAreg.DEGree)

No command help available

param areg_unit_agle:

No help available

set_doppler(areg_obj_dopp_unit: AregDopplerUnit) → None

# SCPI: [SOURce<HW>]:AREGenerator:UNITs:DOPPler
driver.source.areGenerator.units.set_doppler(areg_obj_dopp_unit = enums.AregDopplerUnit.FREQuency)

Defines if the radial velocity is defined as Doppler speed or frequency.

param areg_obj_dopp_unit:

SPEed| FREQuency

set_range(areg_unit_range: UnitLengthAreg) → None

# SCPI: [SOURce<HW>]:AREGenerator:UNITs:RANGe
driver.source.areGenerator.units.set_range(areg_unit_range = enums.UnitLengthAreg.CM)

Defines the range unit.

param areg_unit_range:

M| CM| FT M Meter CM Centimeter FT Feet

set_rcs(areg_unit_rcs: UnitRcsAreg) → None

# SCPI: [SOURce<HW>]:AREGenerator:UNITs:RCS
driver.source.areGenerator.units.set_rcs(areg_unit_rcs = enums.UnitRcsAreg.DBSM)

Defines the unit of the radar cross section.

param areg_unit_rcs:

DBSM| SM DBSM dB relative to one square meter. SM m2 (square meters) .

set_shift(areg_unit_shift: UnitShiftAreg) → None

# SCPI: [SOURce<HW>]:AREGenerator:UNITs:SHIFt
driver.source.areGenerator.units.set_shift(areg_unit_shift = enums.UnitShiftAreg.HZ)

No command help available

param areg_unit_shift:

No help available

set_speed(areg_unit_speed: UnitSpeedAreg) → None

# SCPI: [SOURce<HW>]:AREGenerator:UNITs:SPEed
driver.source.areGenerator.units.set_speed(areg_unit_speed = enums.UnitSpeedAreg.KMH)

Defines the speed unit.

param areg_unit_speed:

KMH| MPH| MPS KMH Kilometer per hour MPH Miles per Hour MPS Meter per Seconds